HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 169)

Virtual Connect server profiles 169
Device Port Type VC Connections Assigned
LOM
1 NC551i Enet 1, FCoE 1, Enet 7
2 NC551i Enet 2, FCoE 2, Enet 8
MEZ1 1 NC551m Enet 3, FCoE 3, Enet 9
2 NC551m Enet 4, FCoE 4, Enet 10
MEZ2 1 NC551m Enet 5, iSCSI 1
2 NC551m Enet 6, iSCSI (PF disabled)
Bandwidth assignment
In Flex-10 environments, four FlexNICs must share a single 10Gb link. Each FlexNIC is allocated a
guaranteed portion of that 10Gb link's bandwidth and can transmit up to 10Gb. The network adapter
automatically adjusts the FlexNIC port speed between the guaranteed minimum speed and the maximum
speed based on the server's transmit demand and unutilized physical port bandwidth.
Each FlexNIC is assigned two port speeds: minimum and maximum. The requested bandwidth is translated
to a minimum allocated speed. The sum of the minimum allocated speed assigned to the four FlexNICs in a
single physical port is equal to10Gb, but the requested bandwidth settings specified in the profile might
exceed 10Gb. For all requested bandwidth settings, the maximum allocated speed is determined by the
maximum configured speed for the network or fabric. For example, FlexNIC a and b are assigned a
minimum port speed of 5Gb and a maximum port speed of 10Gb. When one of the FlexNICs does not use
the port bandwidth or does not achieve the minimum 5Gb actual throughput, the other FlexNIC can use the
unused bandwidth, up to 10Gb.
Requested bandwidth is translated to the minimum allocated speed with the following rules:
1. FlexNICs with a "preferred" or "custom" value for requested bandwidth receive their allocated
bandwidth first. For example, if the requested bandwidth setting for the four FlexNICs on a given port
are all 2Gb, then each FlexNIC can be assigned 2Gb of bandwidth.
Requested Allocated
FlexNIC a 2Gb 2Gb
FlexNIC b
2Gb 2Gb
FlexNIC c 2Gb 2Gb
FlexNIC d 2Gb 2Gb
2. After bandwidth is allocated in rule 1 above, FlexNICs with an "Auto" value for the requested
bandwidth divide the remaining bandwidth evenly. For example, if the requested bandwidth setting for
the four FlexNICs on a given port are 1Gb, Auto, Auto, and Auto, then the first FlexNIC is assigned
1Gb (as per rule 1) and the other three FlexNICs divide the remaining 9Gb evenly (3Gb each). There
might be some cases where the bandwidth does not divide evenly because VCM assigns bandwidth in
increments of 100Mb. Connections with a "preferred" setting to a network where no preferred speed
has been defined are treated as a connection set to "auto".
Requested Allocated
FlexNIC a 1Gb 1Gb
FlexNIC b Auto 3Gb
FlexNIC c Auto 3Gb
FlexNIC d Auto 3Gb