HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 234)

Virtual Connect modules 234
Column Description
Physical Server Number of the device bay and a description of the installed server blade
Network Network name or the name of the shared uplink associated with this port
SAN Fabric Name of the SAN fabric associated with this port
SAN Uplink Port SAN uplink port associated with this server port
Profile Name of the server blade profile
Status Shows the link status, link speed, and connectivity of the port. If the port is
unlinked and no connectivity exists, the cause is displayed. For more
information about possible causes, see "Port status conditions (on page 261 )."
Detailed Statistics (" Ethernet Port
Detailed Statistics screen " on
page 236 )
Click to display detailed statistics about this port or subport
Ethernet Bay Summary (MAC Address Table) screen
This screen shows the MAC addresses that have been seen on the ports of the VC-Enet module. If a network
is assigned to the port, the network name appears. If a shared network is assigned to the port, the network
name and VLAN ID appear. If a LAG has formed with the uplink ports, the LAG ID appears.
The following table describes the columns within the MAC Address Table.
Column Description
Port Label of the port on which the MAC address was seen
Flex-10 downlinks ports are displayed as dx:vx, for example, d1:v1
MAC Address MAC address that was seen
Type Identifies how the address was seen (Learned or Other)
LAG Identifies the group of ports that have been aggregated together to form an
802.3ad Link Aggregation Group. This ID is unique only within a single
VC-Enet module, meaning the same LAG ID can be used on different VC-Enet
modules, but it is only meaningful for ports within the same VC-Enet module.