HP StorageWorks 16-EL SAN Switch - Manual (Page 120)

Switch Admin Window
120 Web Tools Version 3.1.x/4.1.x User Guide
About the Configure Tab
Use the Configure tab of the Administrative Interface to configure Fabric
Parameters, Virtual Channel parameters, Arbitrated Loop parameters, and System
Services parameters. For more detailed information regarding the fields available
in this tab, see the
configure command in the HP StorageWorks Fabric OS
Version 3.1.x/4.1.x Reference Guide.
Note: Many parameter fields and checkboxes within the Configure tab can only be
modified if the switch is disabled. If a parameter value is shaded gray, that value is
read-only. To modify the value, you must first disable the switch.
Configure (Fabric) Tab Example
An example of the Configure (Fabric) Tab is shown in Figure 25 .