HP StorageWorks 16-EL SAN Switch - Manual (Page 144)

Switch Admin Window
144 Web Tools Version 3.1.x/4.1.x User Guide
Table 33: Extended Fabric Field Descriptions
Fields Descriptions
Extended Fabric Mode
Enable Click the radio button to enable the Extended Fabric mode.
The switch must be disabled to enable the Extended Fabric
mode.
Disable Click to disable the Extended Fabric Mode.
Port Number Displays the port number being used for the Extended
Fabric.
VCXLT Link Init
Enabled
Check the box to enable Virtual Channel link translation. See
“ About the Upload/Download Tab ” on page 103.
Port Speed Displays the current port speed. The possible port speeds are
described in “ About the Upload/Download Tab ” on
page 103.
Long Distance
Setting
Display or configure the long distance setting. Change by
selecting from the drop-down menu.
The below values do not require an Extended Fabric license:
■
L0 - No long distance setting enabled.
■
LE - Extended Normal setting enabled, less than 10 km
or 6 miles.
The below values require an Extended Fabric license:
■
L0.5 - Less than 25 km.
■
L1 - Medium long distance setting enabled, less than 50
km or 31 miles.
■
L2 - Long distance setting enabled, less than 100 km or
62 miles.
■
LD - Dynamic setting.