HP SAN Virtualization Services Platform - Manual (Page 42)

_StoragePool PoolName _thin 0|1, ~
[-VirtualDisk SourceVirtualDisk _Destination DestinationVirtualDisk ~
_StoragePool PoolName _thin 0|1,] ~
-timeout 900
Description
Creates a remote snapclone group with one task over a single virtual disk that is built over a snapclone.
For any virtual disk included in the source snapclone group, you need to create a destination virtual
disk and a storage pool from which the destination virtual disk is created.
NOTE:
The number of source virtual disks (-VirtualDisk ) must be the same as the number of virtual disks
in the source snapclone group. Keep the same order as the virtual disks appear in the snapclone
group virtual disk list.
The Priority argument has no significance, and should be treated as optional.
GetSnapcloneGroupInfo command
Syntax
GetSnapcloneGroupInfo -Group GroupName
Description
Gets snapclone group information.
GetSnapcloneTaskInfo
command
Syntax
GetSnapcloneTaskInfo -task TaskName
Description
Gets snapclone task information.
ListSnapcloneGroups
command
Syntax
ListSnapcloneGroups
Description
Lists snapclone groups.
Using the VSM command line interface 42