HP SAN Virtualization Services Platform - Manual (Page 62)

NOTE:
The task name must be entered as it appears in the GUI (in the format of
VSMDomainName:TaskName).
ChangeSyncMirrorGroupMode
command
Syntax
ChangeSyncMirrorGroupMode -Group SyncMirrorGroupName, -Mode 1|2
Description
Changes the mode of operation of a synchronous mirror group.
Mode can be one of the following:
1 —Always synchronous
2 —Automatic failover
CreateSyncMirrorGroup
command
Syntax
CreateSyncMirrorGroup -Name SyncMirrorGroupName, ~
-VirtualDisk SourceVirtualDiskName, ~
[ -QuickRestore 1 | 2 ,] [-Mode 1|2 ,] -timeout 900
Description
Creates a synchronous mirror group.
Mode can be one of the following:
1 —Always synchronous (default)
2 —Automatic failover
QuickRestore
is actually the dirty mode behavior, and can be one of the following:
1 —No QuickRestore (default)
2 —QuickRestore regions
IMPORTANT:
Be aware that the default values for QuickRestore and Mode are not commonly used for SVSP,
and the other value for these arguments are used most often.
Sample usages
1. CreateSyncMirrorGroup -Name SyncName, -VirtualDisk “test”, -timeout 900
Using the VSM command line interface 62