Get-clusternodenames, Preconditions, Syntax – HP 3PAR Recovery Manager Software User Manual
Page 67
•
Scenario 4: Cannot communicate with the VMs.
VM is specified, but RMH Server cannot communicate with specified VMs.
•
Scenario 5: Expiry is invalid.
Expiry specified is invalid. Valid: 1-43800h, 1-1825d.
•
Scenario 6: Retention is invalid.
Retention specified is invalid. Valid: 1-336h, 1-14d.
•
Scenario 7: VM(s) are not running.
VM(s) that are to be backed up must be running.
•
Scenario 8: License is missing for RMH.
License is missing for RMH.
•
Scenario 9: License is missing for Storage System Virtual Copy.
License is missing for Storage System Virtual Copy.
•
Scenario 10: VHD(s) are not on NTFS volumes.
VHDs need to reside on NTFS volumes.
•
Scenario 11: VSS is not operational.
VSS is not operational or not installed.
•
Scenario 12: VSS requestor fails.
VSS requestor fails during backup. Reason is displayed.
•
Scenario 13: Multiple Storage Systems is not supported.
RMH does not support multiple Storage Systems for VM.
Get-ClusterNodeNames
Get-ClusterNodeNames
retrieves node names for the Hyper-V cluster.
Preconditions
The user must first login with Login-Rmh.
Syntax
Any optional parameters require square brackets [ ] around them.
Get-ClusterNodeNames -RmhServerName <RmhServerName> -HypervName
<HypervName> [-Verbose]
Table 39 Get-ClusterNodeNames parameters
Description
Optional/Required
Parameter
Host name of the RMH Server. This is
FQDN or IP address.
Required
-RmhServerName
Optionally select Hyper-V host/cluster
to use. If not specified, Hyper-V
Required
-HypervName
host/cluster must be selected using
Select-Hyperv
. This is FQDN or IP
address. Synonyms for Hyper-V are
supported. The localhost is not
supported.
Displays progress messages.
Optional
-Verbose
Get-ClusterNodeNames
67