Restore-vcopyvm, Preconditions, Syntax – HP 3PAR Recovery Manager Software User Manual
Page 53
Table 30 Mount-vCopy parameters (continued)
Description
Optional/Required
Parameter
Hyper-V user name. If not specified,
HypervUsername
is used from
Login-Rmh
.
Optional
-HypervPassword
Displays progress messages.
Optional
-Verbose
The command returns RmhMountVirtualCopySetResult objects and contains:
•
RmhMountVirtualCopySet
with current state updated
•
Information on name, WWN, partition, volume guid path, and mount point of each Virtual
Volume mounted
Restore-vCopyVm
The restore-vCopyVm initiates a full restore or recovery of Virtual Machines.
Preconditions
The user must first login with Login-Rmh.
Syntax
Any optional parameters require square brackets [ ] around them.
Restore-vCopyVm -RmhServerName <RmhServerName> [-HypervName] -VcNameUuid
<VcNameUuid> -VmNameUuid <VmNameUuid> [-Timestamp] [-Force] [-RestartVm]
[-Verbose]
Table 31 Restore-vCopyVm parameters
Description
Optional/Required
Parameter
Host name of the RMH Server. This is
FQDN or IP address.
Required
-RmhServerName
Optionally select Hyper-V host/cluster
to use. If not specified, Hyper-V
Optional
-HypervName
host/cluster must be selected using
Select-Hyperv
. This is FQDN or IP
address. Synonyms for Hyper-V are
supported. The localhost is not
supported.
Select VC by name/uuid.
Required
-VcNameUuid
Select name/uuid to filter VC selection
by VM.
Required
-VmNameUuid
Specify timestamp of VC to locate in
the format mmddyyhhmmss.
Optional
-Timestamp
Bypass confirmation prompt.
Optional
-Force
If specified, VM will be restarted.
Optional
-RestartVm
Displays progress messages.
Optional
-Verbose
This command returns the location of restored Virtual Machine and host name.
Working with Virtual Copies
53