Remove-hyperv, Preconditions, Syntax – HP 3PAR Recovery Manager Software User Manual
Page 76
•
Scenario 3: License is missing for RMH.
License is missing for RMH.
•
Scenario 4: Storage System host is not available to mount Virtual Volume(s).
A Storage System host must be available to mount Virtual Volume(s).
•
Scenario 5: One or more Virtual Volumes mount points already exist.
Using specified mount point prefix and RMH format of RMH.vv-wwn, the mount point attempted
is already in use.
•
Scenario 6: Storage System fails to export Virtual Volume.
Storage System fails to export Virtual Volume on requested host. Reason is displayed.
•
Scenario 7: Assign mount points on Hyper-V host fails.
An attempt to assign mount points for Virtual Volumes fails on host.
•
Scenario 8: Only one Virtual Copy may be mounted at a time
Filtering of Virtual Copies using –VcNameUuid/-VmNameUuid does not result in only one
Virtual Copy to mount.
Remove-HyperV
Remove-HyperV
removes Microsoft Hyper-V host/cluster credentials associated with a RMH user.
Preconditions
The user must first login with Login-Rmh.
Syntax
Any optional parameters require square brackets [ ] around them.
Remove-HyperV -RmhServerName <RmhServerName> [-HypervName] [-Verbose]
Table 47 Remove-HyperV parameters
Description
Optional/Required
Parameter
Host name of the RMH Server. This is
FQDN or IP address.
Required
-RmhServerName
Optionally select Hyper-V host/cluster
to use. If not specified, Hyper-V
Optional
-HypervName
host/cluster must be selected using
Select-Hyperv
. This is FQDN or IP
address. Synonyms for Hyper-V are
supported. The localhost is not
supported.
Displays progress messages.
Optional
-Verbose
76
HP 3PAR Recovery Manager for Microsoft Hyper-V Powershell Commands