Figure 3 host group example 1, Figure 4 host group example 2, Host modes – HP StorageWorks XP Remote Web Console Software User Manual

Page 16: Table 3 host modes for host operating systems, 3 host group example 1, 4 host group example 2, 3 host modes for host operating systems

Advertising
background image

16

LUN Manager for the XP1024/XP128

In

Figure 3

, the host group hpux01 is associated with six LUs. LU paths are defined between the three

hosts in the hpux01 group (WWN_1, WWN_2, WWN_3) and the six logical units LUN00-LUN05.

Figure 3

Host group example 1

Figure 4

Host group example 2

LUN Manager can define paths between a single host and multiple LUs. In

Figure 4

, each of the three

hosts in the host group hpux01 can access the six LUs. LUN Manager can also define paths between

multiple hosts and a single LU.
Hosts can be members of only one host group for a given port. Host group definitions and members apply

only to the port that they are defined for.

Host modes

As part of registering hosts in host groups, you will be asked for the host mode. Use

Table 3

to determine

the host mode.

Table 3

Host modes for host operating systems

Host mode

Host operating system

00

Red Hat Linux, IRIX, or Windows

1

(Standard)

01 – 03

Reserve

04

DYNIX/ptx (Sequent)

Advertising
This manual is related to the following products: