HP StorageWorks XP Remote Web Console Software - Manual (Page 27)

LUN Configuration and Security Manager XP user guide for the XP1024/XP128 27
LU Path tree
The LU Path tree on the upper left of the LUN Manager tab lists the Fibre Channel ports in the disk array
and hosts connected to them. Hosts are identified by nicknames and WWNs and are classified by host
groups.
The LU Path tree may contain different folders: Fibre Channel, iSCSI, and so on.
Fibre Channel folder
The following Fibre Channel port icons are used in the LU Path tree:
NOTE: High-speed (2 port) mode is available only if the XP disk array has firmware version 21.06.22 or
later installed.
iSCSI folder
Figure 10 iSCSI folder in LU path tree
When you double-click the iSCSI folder, iSCSI ports in the disk array appear as icons. The port name and
port attribute appear to the right of each icon.
NOTE:
•
The iSCSI folder is available if the disk array has an iSCSI channel adapter
• iSCSI ports always have the Target attribute
Table 6 Fibre Channel port icons for LUN Manager operations
Icon Status
A short-wave port in standard mode without LUN security
A short-wave port in standard mode with LUN security
A long-wave port in standard mode without LUN security
A long-wave port in standard mode with LUN security
A short-wave port in high-speed mode without LUN security
A short-wave port in high-speed mode with LUN security
A long-wave port in high-speed mode without LUN security
A long-wave port in high-speed mode with LUN security