HP ProLiant xw460c Blade Workstation - Manual (Page 13)

Introduction 13
• Only standard ASCII inbound login authentication. PAP, CHAP, or ARAP login methods are not
supported. One-time password authentication is also not supported.
• Authorization privilege levels of only 0, 3, and 6. These map to management levels of user, oper,
and admin, respectively.
• The accounting attributes of protocol, start_time, stop_time, and elapsed_time. For BBI users,
accounting stop records are only sent if the user presses the QUIT button.
SSH and SCP
SSH and SCP use secure tunnels to encrypt and secure messages between a remote administrator and the
switch. Telnet does not provide this level of security. The Telnet method of managing a switch does not
provide a secure connection.
SSH is a protocol that enables remote administrators to log securely into the switch over a network to
execute management commands.
SCP is used to copy files securely from one machine to another. SCP uses SSH for encryption of data on
the network. On a switch, SCP is used to download and upload the switch configuration via secure
channels.
XModem
The switch supports XModem for transferring files during direct dial-up communications. XModem sends
blocks of data in 128-byte blocks, and includes an error-detection system called a checksum. When the
data is received, the error detection system ensures that the entire message reached its destination. If not,
the receiving computer sends a request for retransmission of the data.
IGMP Snooping
The switch supports IGMP Snooping for multicasting. Both Version 1- and Version 2-based IGMP
Snooping are supported. In addition, auto detection of the multicast router port and manual configuration
of the multicast router port is supported. For efficient multicast traffic management, the IGMP Filtering
option is supported.
Jumbo frames
By default, the switch supports jumbo frames up to 9216 bytes, which help reduce server CPU utilization
and increase application throughput. No configuration is required. The switch does not fragment frames
as they exit, or assemble packets into jumbo frames as they enter the switch.
Auto-MDI/MDIX
The switch Ethernet ports are MDI/MDI crossover capable. MDI/MDIX is a type of Ethernet port
connection using twisted pair cabling. The MDI is the component of the MAU that provides the physical
and electrical connection to the cabling medium. An MDIX is a version of MDI that enables connection
between like devices. MDI ports connect to MDIX ports via straight-through twisted pair cabling whereas
both MDI-to-MDI and MDIX-to-MDIX connections use crossover twisted pair cabling. The switch has the
capability to automatically detect the cable selection/type, making the distinction between a straight-
through cable and a crossover cable unimportant.
Auto-negotiation of duplex mode and speed
Auto-negotiation of duplex mode and speed are configured on the switch. Network adapters that support
multiple data speeds, such as Fast Ethernet and Gigabit Ethernet, choose the speed at which they run