Tcp/ip connection – HP Designjet T1120 Printer series User Manual
Page 25
Click Continue.
10.
Continue following the instructions on the screen. When you reach the Printer Queue Created
screen, click Quit to exit, or Create New Queue if you want to connect another printer to the
network.
11.
When the HP Printer Setup Assistant has finished, you can remove the DVD from the DVD drive.
If the printer driver is already installed, the HP Printer Setup Assistant can be run at any time from the
DVD.
TCP/IP connection
1.
Go to your printer's front panel and press the
Menu
key until you see the status screen.
Note the URL of your printer (http://XXXX11 in this example).
2.
Insert the HP Start-Up Kit DVD into your DVD drive.
3.
Open the DVD icon on your desktop.
4.
Open the Install icon for your printer (HP Designjet T1120ps or T1120).
5.
Open the Mac OS X HP Designjet Installer icon.
16
Chapter 2 Installing the software
ENWW
In
st
alling t
h
e
sof
tw
are