Turn usage information on and off – HP Designjet T1120 Printer series User Manual
Page 32
In each case, you will see the following options:
●
In order: pages are nested in the order in which they are sent to the printer. The nested pages are
printed as soon as one of three conditions is met:
◦
The next page will not fit on the same row as the other pages already nested.
◦
No page has been sent to the printer during the specified wait time.
◦
The next page is incompatible with the pages already nested (see
●
Optimized order: pages are not necessarily nested in the order in which they are sent to the printer.
When it receives an incompatible page, the printer holds it and waits for compatible pages to
complete the nest. The nested pages are printed as soon as one of three conditions is met:
◦
The next page will not fit on the same row as the other pages already nested.
◦
No page has been sent to the printer during the specified wait time.
◦
The incompatible-page queue is full. The printer can queue up to six incompatible pages while
nesting compatible pages. If it receives a seventh incompatible page, the nest is printed as it
is.
●
Off: nesting is disabled.
The nesting wait time can be set at the front panel: Setup menu icon
, Job management > Nest
options > Select wait time.
TIP:
Optimized order uses the minimum amount of paper; however, it may take longer to print
because the printer waits for compatible pages to arrive.
Turn usage information on and off
The printer can send usage information periodically by e-mail. You can request this in the following
ways:
●
In the HP Printer Utility for Windows: select Settings > Accounting.
●
In the HP Printer Utility for Mac OS: select Configuration > Printer Settings > Configure
Printer Settings > Accounting.
●
In the Embedded Web Server: select Setup > Printer settings > Accounting.
In each case, you must set the following options:
●
Send accounting files: On
●
Send accounting files to: a valid e-mail address
●
Send accounting files every: choose a number of days (1–60) or a number of prints (1–500)
You must also ensure that the e-mail server has been configured. To configure the e-mail server using
the Embedded Web Server, select Setup > E-mail server, and fill in the following fields:
●
SMTP server: the IP address of the outgoing mail server (SMTP) that will process all e-mail
messages from the printer. If the mail server requires authentication, e-mail notifications will not
work.
●
Printer e-mail address: each e-mail message sent by the printer must include a return address,
which does not need to be a real, functional E-mail address, but it should be unique, so that
recipients of the message can identify the printer that sent it.
ENWW
Turn usage information on and off
23
Se
tt
ing up the
er