HP TopTools - Manual (Page 28)

toptools user guide
Step 12: Configure Advanced Settings option
When all the selected Toptools components have been installed, you may choose to make advanced configuration
settings for discovery before starting Toptools. Depending on the size of your network, you may want to configure
discovery settings rather than wait for the first discovery cycle to complete.
If you click No, the installation wizard will use the networking configuration of the Toptools server to discover the
local networks that the Toptools server communicates with.
Click Yes to configure the discovery process.
The next graphic shows the first dialog for configuring advanced configuration settings. In this dialog, you can
specify additional networks for Toptools to discover. The first entry is based on the IP network that the Toptools
server resides in. Be certain that the subnet masks specified for IP networks are correct, and that additional IPX
networks are accessible to the Toptools server through the frame type used by the Toptools server or through an IPX
router.
28