Remove a printhead – HP Designjet T7100 Printer series User Manual
Page 59
6.
The front-panel display confirms that all cartridges have been correctly inserted.
Remove a printhead
WARNING!
Make sure that the printer wheels are locked (the brake lever is pressed down) to
prevent the printer from moving.
Printhead replacement must be performed after the printer has been turned on with the hard power
switch at the back of the printer.
1.
At the front panel, select the
icon, then select Replace printheads.
2.
The printer moves the carriage into the correct position.
CAUTION:
If the carriage remains in the removal position for more than 3 minutes without
inserting or removing any printheads, it will attempt to return back to its home position to the right.
3.
When the carriage has stopped moving, the front panel prompts you to open the printer window.
ENWW
Work with ink system components
51
Ha
nd
le
the
ink sys
tem