HP StoreAll Storage - Manual (Page 77)

On the CIFS Shares panel, click Add or Modify to open the File Shares wizard, where you can
create a new share or modify the selected share. Click Delete to remove the selected share. Click
CIFS Settings to configure global file share settings; see
“Configuring SMB signing ” (page 75) )
for more information.
You can also view CIFS shares for a specific file system. Select that file system on the GUI, and
then select CIFS Shares from the lower Navigator.
Configuring and managing CIFS shares with the CLI
Adding, modifying, or deleting shares
Use the ibrix_cifs command to add, modify, or delete shares. For detailed information, see
the HP IBRIX X9000 Network Storage System CLI Reference Guide.
NOTE: Be sure to use the ibrix_cifs command located in <installdirectory>/bin.
The ibrix_cifs command located in /usr/local/bin/init is used internally by X9000
Software and should not be run directly.
Add a share:
ibrix_cifs -a –f FSNAME –s SHARENAME -p SHAREPATH [-D SHAREDESCRIPTION]
[-S SETTINGLIST] [-A ALLOWCLIENTIPSLIST] [-E DENYCLIENTIPSLIST] [-F
FILEMODE] [-M DIRMODE] [-h HOSTLIST]
CIFS shares 77