HP StoreAll Storage - Manual (Page 79)

NOTE: To use MMC to manage CIFS shares, you must be authenticated as a user with share
modification permissions.
NOTE: If you will be adding users with the MMC, the primary authentication method must be
Active Directory.
NOTE: The permissions for CIFS shares managed with the MMC cannot be changed with the
X9000 Management Console GUI or CLI.
Connecting to cluster nodes
When connecting to cluster nodes, use the procedure corresponding to the Windows operating
system on your machine.
Windows XP, Windows 2003 R2:
Complete the following steps:
1. Open the Start menu, select Run, and specify mmc as the program to open.
2. On the Console Root window, select File > Add/Remove Snap-in.
3. On the Add/Remove Snap-in window, click Add.
4. On the Add Standalone Snap-in window, select Shared Folders and click Add.
5. On the Shared Folders window, select Another computer as the computer to be managed,
enter or browse to the computer name, and click Finish.
6. Click Close > OK to exit the dialogs.
7. Expand Shared Folders (\\<address>).
8. Select Shares and manage the shares as needed.
CIFS shares 79