HP Deskjet D2560 Printer - Manual (Page 82)

NOTE: In the procedures below, the "problem" cartridge is identified by the blinking
light. The light on the left blinks when the tri-color print cartridge (on the left) is the
problem and the light on the right blinks when the black cartridge (on the right) is the
problem. If both lights blink, either both cartridges are the problem, or the printer
cannot determine the problem cartridge.
To determine which cartridge is having the problem
1. Make sure the printer is on.
2. Open the printer cover. Wait until the print cartridge carriage moves to the right side
of the printer and is idle and quiet.
3. Remove the tri-color print cartridge from the slot on the left. Press down on the
cartridge, and then slide it out of the print cartridge carriage.
4. Close the printer cover.
5. Check to see if the error has been resolved.
• If the error has been resolved, then there is a problem with the tri-color print
cartridge.
• If the error has not been resolved, continue to the next step.
6. Open the cover and reinsert the tri-color print cartridge by sliding it forward into the
slot on the left. Then push the print cartridge forward until it snaps into place.
7. Repeat the steps to remove the other print cartridge from the slot on the right.
Print cartridge problems 79
Trou
bles
ho
ot
ing