HP Traffic Director sa7220 - Manual (Page 196)

C H A P T E R 5 HP Traffic Director Server Appliances User Guide
184
config sys snmp trap
create community Specifies the host to which SA8220 sends SNMP traps. Up to 10
trap receivers can be created. By default the trap receiver list is
empty, that is, no traps are sent.
config sys snmp trap create <ip address>
community <community string>
where:
•
ip address is the IP address of the host to which you wish
to send SNMP traps
• community string is sent with all traps sent to the IP
address
config sys snmp trap
delete community Deletes a host from the trap receiver list.
config sys snmp trap delete <ip address>
community <community string>
where:
•
ip address is the IP address of the host you want to delete
from the trap receiver list
• community string is an identifier associated with
specified access rights
config sys snmp trap
info Displays the trap receiver list.
config sys snmp trap
port Specifies the port to which the SA8220 sends traps.
config sys snmp trap port <port>
where port is a number between 5020 and 65535 (the default is
162)
show sys snmp info Displays all SNMP information
Command Description