HP Traffic Director sa7220 - Manual (Page 197)

C H A P T E R 5 SSL Commands (SA8200/SA8220 only)
185
SSL
Commands
(SA8200/
SA8220 only) The Secure Transactions (SSL) commands unique to the SA8220. are
described below.
Command Description
config policygroup
service key certificate
create
NOTE: When the
procedure is complete, you
can type
info at the prompt
to verify the key’s creation.
Creates a certificate. A private key must be created prior to using
this command. You can optionally provide distinguished name
(DN) information. If no DN information is provided, the default
DN information is used. The default DN information can be
viewed or changed by using the ssl dn command.
config policygroup <policy-name> service
<service-name> key certificate create {life
<life> name <name> email <email> state <state>
organization <org> unit <unit> locality <loc>
country <country> }
where:
•
policy-name is the name of a policy group
• service-name is the name of a service
• life is the number of days the certificate remains valid
(range is 1-365 days; the default is 30 days)
• name is the common (server) name
• email is the email address, state is the name of your state
or province
• organization is the name of your company or
organization, unit is your organizational section
• locality is the name of your city or locality
For example, creating a certificate that expires in 120 days:
HP SA8220/.../<server> port <port>
number>#certificate create life 120