HP Photosmart D5345 Printer - Manual (Page 84)

Solution: Load paper in the input tray.
For more information, see:
“Load paper” on page 17
Software installation troubleshooting
Use this section to solve any problems you might encounter while setting up the
HP Photosmart software.
This section contains the following topics:
• When I insert the CD-ROM into my computer’s CD-ROM drive, nothing happens
• The minimum system checks screen appears
• A red X appears on the USB connect prompt
• I received a message that an unknown error has occurred
• The registration screen does not appear
• Uninstall and reinstall the software
• Missing HP Photosmart Software
When I insert the CD-ROM into my computer’s CD-ROM drive, nothing happens
Cause: The installation failed to run automatically.
Solution: If the installation does not run automatically, you can start it manually.
To start the installation from a Windows computer
1. From the Windows Start menu, click Run (or click Accessories, and then Run).
2. In the Run dialog box, enter d:\setup.exe, and then click OK.
If your CD-ROM drive is not assigned to drive letter D, enter the appropriate drive
letter.
The minimum system checks screen appears
Cause: Your system does not meet the minimum requirements to install the
software.
Solution: Click Details to see what the specific problem is, and then correct the
problem before attempting to install the software.
A red X appears on the USB connect prompt
Cause: Normally, a green check appears indicating that the USB connection is
successful. A red X indicates that the USB connection failed.
Software installation troubleshooting 83
Trou
bles
ho
ot
ing