HP ESL E-series Tape Libraries - Manual (Page 97)

1
1
2
1 Bolt
2 Hex nuts
Figure 61 Installing the internal library frame restraint
8. Attach the two pieces together using four 1/4-inch hex nuts.
9. Secure the restraint to the frame with two 1/4-inch bolts, one at the top and one at the bottom
of the library frame.
10. From the front of the library, add the foam to the Y-axis cover plate, to the left front door, and
also to the back door frame (see Figure 62 ).
HP StorageWorks 97