HP Smart Array 6i Controller and 128MB BBWC - Manual (Page 11)

Configuring an Array 11
Using ACU
For detailed information about using ACU, refer to the HP Array Configuration
Utility User Guide. This document is available on the Documentation CD that is
provided in the controller kit.
Using ORCA
When a server is powered up, POST runs, and any array controllers that are in
the system are initialized. If the array controller supports ORCA, POST
temporarily halts, and an ORCA prompt message is displayed for approximately
five seconds. (If ORCA is not supported, the prompt message is not displayed,
and the system continues with the startup sequence.)
HP CONFIDENTIAL
File Name: 347914-1.doc Last Saved On: 1/26/04 9:31 AM