HP Smart Array 6i Controller and 128MB BBWC User Manual
Page 13
Advertising
Configuring an Array
13
4. Press
the
F8 key to confirm the settings and save the new configuration.
After several seconds, the Configuration Saved screen appears.
5. Press
the
Enter key to continue.
You can now create another logical drive by repeating the previous steps.
NOTE: Newly created logical drives are invisible to the operating
system. To make the new logical drives available for data storage,
format them using the instructions given in the operating system
documentation.
HP CONFIDENTIAL
File Name: 347914-1.doc Last Saved On: 1/26/04 9:31 AM
Advertising