HP LaserJet 9000 Printer series User Manual
Page 11
Advertising
ENWW
Configuring control panel settings 11
Default stapler actions for bin 1 (stacker bin)
No Staple
If the default action is set to
NO STAPLE
, the job is not stapled.
Corner Staple
If the default action is set to
ONE STAPLE
, the staple is placed in
the top left corner of the document. If you are printing in
landscape format, the staple location is automatically adjusted for
placement in the top left corner of the landscape layout.
Two Staples
If the default action is set to
TWO STAPLES
, two staples are used
with one job or with mopies. Both staples are placed parallel to
the edge closest to the printer (the trailing edge).
Advertising
This manual is related to the following products: