Using the stapler, Selecting the stapler – HP LaserJet 9000 Printer series User Manual
Page 25
ENWW
Using the stapler 25
Using the stapler
The device can staple documents consisting of a minimum of two
pages and a maximum of 50 pages of 75-g/m
2
(20-lb) Letter or A4
paper (a maximum of 25 pages for Ledger or A3 paper). The pages
must be 64 to 199 g/m
2
(17 to 53 lb) in weight for any paper size the
product supports.
Consider these additional points:
z
The stacker bin can hold up to 1,000 sheets stacked (without
staples).
z
Heavier media might have a stapling limit of fewer than 50 pages.
z
If the job you want to have stapled consists of only one sheet, or if
it consists of more than 50 sheets, the device delivers the job to
the bin without staples.
Selecting the stapler
You usually can select the stapler through your program or driver,
although some options might be available only through the driver.
Where and how you make selections depends on your program or
driver. If you cannot select the stapler from the program or driver,
select the stapler from the product control panel.
To select the stapler from the HP LaserJet 9000
control panel
1
Press
to enter the menus.
2
Use
and
to
scroll
to
CONFIGURE DEVICE
and press
.
3
Use
and
to
scroll
to
MULTIFUNC. FINISHER
and press
.
4
Use
and
to
scroll
to
STAPLES
and press
.
5
Use
and
to scroll to the desired stapling option and press
.
Your stapling options are None, One, or Two staples.