HP 3PAR Policy Manager Software - Manual (Page 20)

4.4 The Policy Advisor Script
3PAR Policy Advisor User’s Guide
-ha <current|port|cage|mag>
Specifies the availability of the virtual volume. Volumes can be made available to
ports, cages or magazines. The default is to keep current setting of the virtual
volume.
-devtype <current|FC|NL|SSD>
The device type is FC, NL or SSD. The devtype must be explicitly specified as FC , NL
or SSD . If the devtype is current , the virtual volume is skipped and is not
analyzed.
-tunepct <1-100>
Specifies the minimum percentage of disks used by a virtual volume to be analyzed
by the script. No tuning suggestions are made for virtual volumes using more than
the specified percentage of disks. The percentage must be between 1% and 100%.
The default is 90%.
-list
Display Tune Criteria, Tune Reasons, and Skip Reasons as a list rather than a table.
<VV_name>|<pattern>
The <VV_name> is the name of the virtual volume or volumes specified for analysis
by the Policy Advisor.
Linux and Solaris wildcards.
A pattern consisting of the virtual volume name and embedded wildcards can also
be used. The wildcard character * must be used with the \ character. For example:
./PolicyAdvisor.tcl vvol\* analyzes virtual volume names vvolA , vvolB ,
vvol_copy1 , etc.
Windows wildcards.
A pattern consisting of the virtual volume name and embedded wildcards can also
be used. The wildcard character * can be used with the virtual volume name. For
example: policyadvisor vvol* analyzes virtual volume names vvolA , vvolB ,
vvol_copy1 , etc.