HP XP P9500 Storage - Manual (Page 58)

5. In the S/N box, enter the remote system’s 5-digit serial number.
6. In the LDKC box, select the remote system’s LDKC number.
Enter 00 when the remote system is a P9500, XP24000/XP20000, or XP12000/XP10000
disk array.
7. In the Controller ID box, select the remote system’s controller ID. The controller ID for a P9500
is 6. The controller ID for an XP24000/XP20000 Disk Array is 5. The controller ID for an
XP12000/XP10000 Disk Array is 4.
8. The Path Gr. ID check box is intended for a future release. Continue to the next step.
9. In the M-R Path box, define the logical path between local and remote systems:
1.
In the Port column, select a local system initiator port.
2. In the Pair-Port column, select the remote system RCU target port. This establishes a logical
path with the selected initiator port.
You may enter port numbers using the keyboard. You may abbreviate the number into
two characters. For example, “1A” may be entered instead of “CL1-A.” Letters may be
uppercase or lowercase.
10. Click the Option. The DKC Option dialog box displays, as shown below.
58 Configuration operations