HP Designjet 10000s Printer series - Manual (Page 13)

3 How to install the dryer
Installation space
The following diagram shows the printer (1), the dryer (2), and the free space that should be left around
the dryer in millimeters. The height of the dryer is 870 mm.
The dryer should be positioned at least 50 mm (1) from the paper emerging from the printer (4), with the
air inlet (6) and outlet (3) positioned as shown below. The air inlet (6) should also be at least 300 mm (2)
from any obstruction (5). Lock the castors after installing the dryer.
Power connection
1. After installing the dryer, connect the power cable to the dryer's power socket.
ENWW Installation space 9
How to install
the dryer