HP Designjet 10000s Printer series - Manual (Page 23)

6 Maintenance and cleaning
Maintenance
The dryer should be inspected periodically for defects. If defects are found, they can be repaired by on-
site service or, if necessary, at a service center.
Cleaning
If the surface of the dryer becomes extremely dirty, you can wipe it with a soft cloth dipped in water and
neutral detergent and squeezed tightly.
CAUTION Turn off the dryer's power switch before cleaning.
Do not use thinner, benzene, or other non-volatile solvents for cleaning the dryer: they may
cause the dryer's surface coating to peel or discolor.
ENWW Maintenance 19
Maintenance and
cleaning