Altinex Pop 'N Plug Interconnect Box PNP200 - Manual (Page 4)

ACCESSORIES
3
3
ABOUT YOUR PNP200 2
The PNP200 is designed for installation into a
conference room table. The Pop ‘N Plug™
Interconnect Box (PNP200) provides a means of
connecting audio, video, control, and computer
video sources into a presentation system. It is ideal
for use together with Altinex computer video
interfaces. The Pop ‘N Plug™ Interconnect Box can
either “pop up” into a raised position to provide
access to connectors or it can be lowered into a
table when not in use. Using a tower-type
construction with pneumatic suspension and an
electromagnetic latching mechanism does this.
The Pop ‘N Plug™ Interconnect Box provides easy
access to system inputs when they are needed. It
also removes system inputs when not needed,
eliminating the obstruction. The Pop ‘N Plug™
Interconnect Box has two input plates on either side
of the unit, servicing both sides of a table. Each
standard plate offers Computer Video (15-pin HD);
Composite Video (RCA), Audio (RCA), Computer
Audio (Stereo Mini), Modem (RJ-11), 9-pin D-type
RS-232 and Network (RJ-45) input connections. All
signals are passed through to a set of female
connectors or cables. Several optional connectors
can be substituted for the standard set of
connectors.
The Pop ‘N Plug™ Interconnect Box is designed for
use with tables ranging from one to three inches
thick. It offers an adjustable retaining ring to secure
the unit flush with the table’s surface. The Pop ‘N
Plug™ comes in a standard matte black color. The
top of the unit can be finished to match the table or
it can be painted another color. This is available on
the custom per order basis at an additional charge.
TECHNICAL SPECIFICATIONS 3
FEATURES/DESCRIPTION PNP200
GENERAL
Front Panel Standard
Configuration Connectors
(side without fuse box)
Power
1 IEC (standard)
Computer Video 1 15-pin HD-F
Composite Video 1 Yellow RCA F
Audio, left, right 1 Black, 1 Red RCA F
Audio 1 3.5 mm stereo F
Telephone 1-RJ-11 F (6-position)
Network 1 RJ-45 F (8-position)
Control 1 DB-9 F
Back Panel Standard Configuration Connectors
(side with fuse box )
Power
1 IEC with 10 A fuse
Computer Video 1 15-pin HD-F
Composite Video 1 Yellow RCA
Audio, left, right 1 Black, 1 Red RCA
Audio 1 3.5 mm stereo
Telephone 1-RJ-11
Network 1 RJ-45
Control 1 DB-9 F
Table 1. PNP200 General
MECHANICAL PNP200
Mechanical
Width (inches)
6.030in (153mm)
Height (inches) 8.230in (209mm)
Finish Black
T
°
Operating 10
°
C-35
°
C
T
°
Maximum 50
°
C
Humidity 90
%
non-condensing
Table 2. PNP200 Mechanical
Power
Power for Operation
9V 500mA DC
Power Consumption Max 10 watts
Power Rating (pass through
connector) 90-140 VAC, 2A Max
Table 3. PNP200 Electrical