HP LaserJet 5000 Printer series - Manual (Page 47)

EN
Chapter 2: Printing Tasks 35
Printing Both Sides of Paper
(Optional Duplexer)
The printer can automatically print on both sides of paper with an
optional duplex printing accessory (duplexer). This is called
duplexing. To order optional accessories, see page 8.
Note See the documentation included with the duplexer for complete
installation and setup instructions. Duplexing might require
additional memory (page C-1).
The duplexer supports sizes from 5.8 by 8.3 inches (148 by
210 mm) to 11.7 by 17 inches (297 by 432 mm).
Prepunched paper should be printed in a rotated direction for
2-sided printing (page 47).
Figure 8 Printer with the Optional Duplexer
Duplexer Rear
Section
Duplexer
Top Cover
Duplexer
Base