Powering up and configuring the unit – HP Modular Cooling System User Manual
Page 13
Advertising
Installation 13
12.
If the rear extension is installed, this step is optional. Using two M6 trilobe flathead screws, secure the
two brackets to the MCS 5042 unit frame. For more details on how to install the brackets, see the HP
mc-Series 5042 Hook Up Kit Installation Guide.
13.
Align the access panel with the two brackets.
14.
Using two M6 flathead screws, secure the access panel to the brackets on the MCS 5042 unit frame.
Powering up and configuring the unit
Advertising