Overview, Introduction – HP Modular Cooling System User Manual
Page 5
Advertising
Overview 5
Overview
Introduction
The HP mc-Series 5042 Rack is an air and water heat exchanger that removes high levels of excess heat
generated by equipment installed in HP racks. The installed equipment takes in cold air through the front of
the closed MCS 5042 and uses the air for internal cooling. After the air has been warmed, the MCS 5042
expels the air through the rear vents.
Unit side view
Item Reference
1
Condensation pump
2
Condensation pump controller
3
Control valve
4
Flow meter
5
Humidity sensor
6
Rear extension
Advertising