HP XP P9500 Storage - Manual (Page 32)

Figure 15 Configuration for multiple networks
(5) HORCM_LDEV
The HORCM_LDEV parameter is used for specifying stable LDEV# and Serial# as the physical
volumes corresponding to the paired logical volume names. Each group name is unique and
typically has a name fitting its use (e.g., database data, Redo log file, UNIX file). The group and
paired logical volume names described in this item must also be known to the remote server.
•
dev_group: This parameter is the same as the HORCM_DEV parameter.
•
dev_name: This parameter is the same as the HORCM_DEV parameter.
•
MU#: This parameter is the same as the HORCM_DEV parameter.
•
Serial#: This parameter is used to describe the Serial number of the RAID box.
•
CU:LDEV(LDEV#): This parameter is used to describe the LDEV number in the RAID storage
system and supports three types of format as LDEV#.
#dev_group dev_name Serial# CU:LDEV(LDEV#) MU#
oradb dev1 30095 02:40 0
oradb dev2 30095 02:41 0
◦ Specifying “CU:LDEV” in hex used by SVP or Web console Example for LDEV# 260 01:
04
◦ Specifying “LDEV” in decimal used by the inqraid command of RAID Manager Example
for LDEV# 260 260
◦ Specifying “LDEV” in hex used by the inqraid command of RAID Manager Example for
LDEV# 260 0x104
NOTE: The HORCM_LDEV format can only be used on the XP12000 Disk
Array/XP10000 Disk Array and XP1024/XP128 Disk Array. LDEV# will be converted
to “Port#, Targ#, Lun#” mapping to this LDEV internally, because the RAID storage system
needs to specify “Port#, Targ#, Lun#” for the target device. This feature is XP12000 Disk
Array/XP10000 Disk Array and XP1024/XP128 Disk Array microcode dependent; if
HORCM fails to start, use HORCM_DEV.
32 RAID Manager software environment