HP XP RAID Manager Software - Manual (Page 124)

Description Item
The pools in the storage system are shown with the following icons: Tree
•
: Storage system
•
Pool:X: Pool in normal status (X indicates pool ID)
•
Pool:X: Pool whose usage rate exceeds the threshold (X indicates pool ID)
•
Pool:X: Blocked pool (X indicates pool ID)
The content of the main list is either data pools or pair volumes. This depends on whether you
have selected Storage System or Pool from the tree. Pool/volume list
If Storage System is selected, all pools in the storage system are shown in this list.
Values:
• Pool ID: Pool ID.
•
Capacity (GB): The pool’s storage capacity.
• Used Capacity (GB): The amount of the pool’s capacity that SS pairs are using.
•
Usage rate: The pool’s usage rate.
•
Pool-VOL(s): Total number of pool-VOLs in the pool.
If Pool is selected, the SS pairs that use the pool are shown in this list, with the following items:
• P-VOL: Port ID, group number of the host group, and LUN (LDKC number, CU number, and
LDEV number of the volume) of the P-VOL.
For P-VOL LUs with more than one path, only one path is listed. The path is connected to the
first port within the ports configured to a path that are shown in the tree view of the Pair
Operation window.
• MU: The SS ID.
•
Status: The status of the SS pair.
• S-VOL: Port ID, group number of the host group, and LUN (LDKC number, CU number, and
LDEV number of the volume) of the S-VOL.
For S-VOL LUs with more than one path, only one path is listed. The path is connected to the
first port within the ports configured to a path that are shown in the tree view of the Pair
Operation window. When the volume is unmounted, three hyphens (---) are shown.
•
Pool used (GB): Capacity of the pool that is used by the S-VOL.
124 Snapshot GUI reference (secondary window)