HP LaserJet 1022nw Printer - Manual (Page 36)

Declaration of Conformity
Declaration of Conformity
according to ISO/IEC Guide 22 and EN 45014
Manufacturer's Name: Hewlett-Packard Company
Manufacturer's Address: 11311 Chinden Boulevard,
Boise, Idaho 83714-1021, USA
declares that the product
Product Name: HP LaserJet 1022nw
Regulatory Model 3) : BOISB-0405-01
Product Options: ALL
Toner Cartridge: Q2612A
conforms to the following Product Specifications:
Safety: IEC 60950-1:2001 / EN60950-1:2001 +A11
IEC 60825-1:1993 +A1:1997 +A2:2001 / EN 60825-1:1994 +A1:2002 +A2:2001
(Class 1 Laser/LED Product)
EMC: CISPR 22:1997 / EN 55022:1998 Class B 1)
EN 61000-3-2:2000
EN 61000-3-3:1995 /A1:2001
EN 55024:1998/A1:2001
FCC Title 47 CFR, Part 15 Class B
2) / ICES-003, Issue 4
Radio 4) :
EN 301 489-1:2002 / EN 301 489-17:2002
EN 300 328 V1.4.1: (2003-04)
FCC Title 47 CFR, Part 15 Subpart C (Section 15.247) / IC: RSS-210
Supplementary Information:
The product herewith complies with the requirements of the R&TTE Directive 1999/5/EC Annex IV, EMC Directive 89/336/EEC and the Low
Voltage Directive 73/23/EEC, and carries the CE-Marking accordingly
1) The product was tested in a typical configuration with Hewlett-Packard Personal Computer Systems. Compliance testing of product to
standard with exception of clause 9.5, which is not yet in effect.
2) This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
3) For regulatory purposes, this product is assigned a Regulatory model number. This number should not be confused with the product name
or the product number(s).
4) This product uses a Radio Module Device which Regulatory Model Number is: BOISB-0410-00
Boise, Idaho 83714, USA
10 February 2005
For Regulatory Topics ONLY, contact:
Australia Contact: Product Regulations Manager, Hewlett-Packard Australia Ltd. 31-41 Joseph Street, Blackburn, Victoria 3130, Australia
European Contact: Your Local Hewlett-Packard Sales and Service Office or Hewlett-Packard GmbH, Department HQ-TRE / Standards
Europe Herrenberger Straße 140, D-71034 Böblingen, Germany (FAX: +49-7031-14-3143)
USA Contact: Product Regulations Manager, Hewlett-Packard Company PO Box 15, Mail Stop 160, Boise, Idaho 83707-0015, USA
(Phone: 208-396-6000)
30 Appendix A Regulatory information ENWW