Examples, On fibre channel connection on the port, see, Appendix , “fibre channel addressing – HP XP RAID Manager Software User Manual
Page 226
226
HP StorageWorks Disk Array XP RAID Manager: User’s Guide
Port
Port number, path ID, target ID, and LUN on the device
PathID
adapter mounted to the logical drive. For information
Targ
on Fibre Channel connection on the port, see
Lun
Appendix ,
.
Examples
Windows NT
This Windows NT example executes mount from the pairsplit command
option, mounting the F:\ drive to partition 1 on disk drive 2, and mounting
the G:\ drive to partition 1 on disk drive 1. Then a list of mounted devices is
displayed.
pairsplit -x mount F: hdisk2 p1 -x mount G: hdisk1 p1
pairsplit -x mount
Drive FS_name VOL_name Device
Partition ... Port PathID Targ Lun
C:
FAT
Null
Harddisk0 Partition1...
1
0
0
0
F:
FAT
Null
Harddisk2 Partition1...
2
0
5
1
G:
NTFS
Null
Harddisk1 Partition1...
2
0
5
0
Z:
CDFS
Null
CdRom0
...Unknown
Windows 2000/2003
This Windows 2000/2003 example shows the specification of a directory
mount point on the logical drive.
pairsplit -x mount D:\hd1 \Vol8
D:\hd1 <+> HarddiskVolume8
pairsplit -x mount D:\hd2 \Vol9
D:\hd2 <+> HarddiskVolume9
This Windows 2000/2003 example executes the mount command from a
sub-command option of pairsplit. It mounts the F:\ drive to the
harddiskvolume2, then displays the mounted devices. When the command
is executed without specifying a partition#, the drive is mounted as
HarddiskVolume# for Windows 2000/2003.
pairsplit -x mount F: hdisk2
pairsplit -x mount
Drive FS_name VOL_name Device Partition ... Port PathID Targ Lun
C: NTFS Null Harddiskvolume1 ... Harddisk0
F: NTFS Null Harddiskvolume2 ... Harddisk1
D: NTFS Null Harddiskvolume3 ... Harddisk2
D:\hd1 NTFS Null Harddiskvolume4 ... Harddisk3
D:\hd2 NTFS Null Harddiskvolume5 ... Harddisk4
G: NTFS Null HarddiskDmVolumes\…\Volume1 ... Harddisk5[3]