HP ProCurve 520wl Wireless Access Point - Manual (Page 105)

Other Network Settings
6-22
configure radius accounting server configure radius accounting server configure radius accounting server configure radius accounting server
[Device Name]>set radacctbl <index> status enable seraddrfmt <ipaddr or name> ipaddr
<RADIUS IP address or name> port <user defined> ssecret <user defined>
responsetm <1 to 4 seconds> maxretx <1 to 10 times>
[Device Name]>show radacctbl
Figure 6-17 Figure 6-17 Figure 6-17 Figure 6-17 Results of “show radacctbl” CLI command Results of “show radacctbl” CLI command Results of “show radacctbl” CLI command Results of “show radacctbl” CLI command
configure the dns client configure the dns client configure the dns client configure the dns client
[Device Name]>set dnsstatus enable
[Device Name]>set dnsprisvripaddr <IP address of primary DNS server>
[Device Name]>set dnssecsvripaddr <IP address of secondary DNS server>
[Device Name]>set dnsdomainname <default domain name>
[Device Name]>show dns
Figure 6-18 Figure 6-18 Figure 6-18 Figure 6-18 Results of “show dns” CLI command Results of “show dns” CLI command Results of “show dns” CLI command Results of “show dns” CLI command