HP 3PAR System Reporter Software - Manual (Page 180)

3. Click the Adaptive Optimization tab.
The Adaptive Optimization Configuration window appears ( Figure 60 (page 180) ).
Figure 60 Adaptive Optimization Configuration Main Window
The following information is provided for each Adaptive Optimization configuration:
•
Id -- A unique identification number assigned automatically to the configuration when it
is created.
•
InServ -- Name of the HP 3PAR Storage System for which the configuration is implemented.
•
Tier # CPG Name -- CPG name associated with a given tier (0 - 2) (see “Tier Definition
(CPG Name and GiB)” (page 180) ).
•
Tier # GiB -- Maximum size of the storage space that can be used for the corresponding
tier (see
“Tier Definition (CPG Name and GiB)” (page 180) ).
•
Schedule -- Schedule for the optimization process (see “Schedule” (page 182) ).
•
Measure Hours -- Amount of time a given CPG is monitored for optimization purposes
(see
“Measurement Hours” (page 182) ).
•
Mode -- Optimization mode (Cost/Performance/Balanced. See “Adaptive Optimization
Mode” (page 183) ).
•
Active -- Indicates whether or not optimization is currently implemented (true/false).
•
Change -- Clicking on this link brings up a screen used to change the configuration.
Tier Definition (CPG Name and GiB)
Each tier is defined by the CPG and the maximum space that the tier should use. The CPG definition
includes all the parameters necessary to define a storage tier’s quality of service: the disk type,
disk speed, RAID type, etc. You can specify either two or three tiers. When you specify two tiers
you can choose which tier to leave out by setting its CPG to “-”.
180 Using Adaptive Optimization