HP Deskjet D4160 Printer - Manual (Page 89)

"Print cartridge is in the wrong slot" message
If you receive this error message, the print cartridge is installed in the wrong side of the
print cartridge cradle. Follow the instructions in
"Print cartridge is in the wrong slot"
message to resolve the problem.
"Printing in ink-backup mode" message
If you receive this error message,
follow these instructions .
Other error messages
If you receive an error message, follow these directions.
Out of paper message
If you receive an out of paper message, follow the guidelines in
Out-of-paper message .
"There was an error writing to USB port" message
The printer might not be receiving correct data from another USB device or USB hub.
Connect the printer directly to the USB port on the computer.
"Two-way communication cannot be established" or "Printer not responding"
message
The printer might not be able to communicate with the computer if the USB cable is too
long.
If you receive this error message, make sure that the USB cable is not greater than 3
meters (approximately 9.8 feet) in length.
Note For best printing performance, use a USB 2.0 compatible cable.
Printer lights are on or flashing
● What the flashing light means
● Power light is flashing
● Resume light is flashing
● Both lights are flashing
● Front USB port lights are flashing
What the flashing light means
The printer lights indicate the printer status.
HP Photosmart Software Help 87