HP Modular Cooling System User Manual
Page 11
Advertising
Installation 11
5.
To adjust the leveling feet and level the MCS-100 unit, use a bubble level.
6.
Plug the network cable into the RJ-45 connector on the transfer switch in the top of MCS-100 unit.
7.
Plug the other end of the network cable into your network connection outlet.
WARNING:
Before you connect the power cords to a power source, be sure that the unit is
properly grounded for potential equalization caused by high leakage current.
IMPORTANT:
Do not connect the power cords into a power supply.
Advertising