HP Deskjet 2514 All-in-One Printer - Manual (Page 10)

Behavior Cause and solution
Power light, letter "E", media icon, ink level icons, ink drop icon, and
attention light are blinking. Printer is in an error state.
Reset printer.
1. Turn printer off.
2. Unplug power cord.
3. Wait a minute, plug power cord back in.
4. Turn on printer.
If problem persists, contact HP.
One ink level icon and ink drop icon are blinking, and the attention light is
on. Blinking ink level icon indicates that
corresponding cartridge has a problem. Cartridge
may be improperly installed, incompatible,
counterfeit or very low on ink.
• If you see a message on your computer
screen, refer to the message for more
information about the problem.
• If there is no message on your computer
screen, try removing and reinserting the
cartridge.
• Confirm that you are using the correct HP
cartridge for your printer.
• Determine if the cartridge is defective. See
Identify a defective cartridge .
• If print quality is poor, consider replacing the
cartridge. See
Replace the cartridges .
Both ink level icons and ink drop icon are blinking, and the attention light
is on. Both cartridges have a problem. Cartridges may
be improperly installed, incompatible, defective,
counterfeit or very low on ink.
• If you see a message on your computer
screen, refer to the message for more
information about the problem.
• If there is no message on your computer
screen, try removing and reinserting the
cartridges.
• Confirm that you are using the correct HP
cartridges for your printer.
• Determine if a cartridge is defective. See
Identify a defective cartridge .
• If print quality is poor, consider replacing the
cartridges. See
Replace the cartridges .
Chapter 2
(continued)
8 Get to know the HP Deskjet 2510