Setting up windows nt 4.0 hosts – HP Deskjet 970cxi Printer User Manual
Page 10
8
Locally Shared Printer Connection
2
Setting Up Windows NT 4.0 Hosts
Installing Printer Software on a Windows NT 4.0 Host
1
Turn on the host computer and the printer.
2
Select Start
Settings
Printers from the Taskbar.
3
Double-click Add Printer, choose My Computer as the printer connection,
then click Next.
4
Select the printer port from the Available ports dialog box (LPT1 is the
recommended choice), then click Next.
5
Click the Have Disk button, and insert the HP DeskJet 970C Series Printer
Software CD into your CD-ROM drive.
6
In the Install From Disk dialog box, click Browse, then browse to the HPDJ.INF
file on the CD for your desired language and your computer’s Windows
operating system. See the language code chart on page 21.
Example:
To select the HPDJ.INF file for the English language and the
Windows NT 4.0 operating system, browse enu\nt4inf\HPDJ.INF.
7
Click Open, then click OK, then click Next.
Host
Note:
To install the printer software on a Windows NT 4.0 system, you
must have administrator privileges.
Note:
Close any virus protection programs or other software programs
that are open and running on the computer, except the HP DeskJet
Installer and Windows Explorer or Program Manager.
Note:
If the CD-ROM autoplays and starts an installation program, exit
that program before continuing.