HP NonStop G-Series - Manual (Page 179)

Example: PATH $ZZWAN.#SWAN2.1.B
Attributes
PATH $ZZWAN
Service State
Displayed in the Attributes tab and Attributes dialog box only if attention or service is
required.
Values
Logical
MAC Address The media access control (MAC) address of the SWAN Path.
IP Address The IP address configured for the SWAN Path.
Path State
The state of the SWAN Path as known to the operating system.
Values: Started, Stopped
Actions
Start
Starts the SWAN Path. When the Start action completes, the SWAN Path is in the Started state.
Stop
Terminates operation of the SWAN Path. When the Stop action completes, the SWAN Path is in the
Stopped state.
Verify Logical Configuration
Verifies that the SWAN Path is properly configured. If not, an Incorrect Logical Configuration alarm
is generated on the SWAN Path.
SWAN PS (Power Supply)
Each SWAN 2 CRU has two customer-replaceable power supply subcomponents.
Location in OSM Tree: System > SWAN Collection > SWAN > Power Supply
Example: Power Supply $ZZWAN.#SWAN2.PS2
Attributes
Power Supply
Service State
Displayed in the Attributes tab and Attributes dialog box only if attention or service is
required.
Values