HP NonStop G-Series User Manual
Page 181
System Serial Number
A unique identification number assigned to a server when it is
manufactured. This number is passed automatically to your service provider
when OSM dials out an incident report. Your service provider tracks
systems using system serial numbers.
Operating System
Version
The release version update of the operating system that is running on the server.
Example: G06.24
Other values that might be displayed for Operating System Version are Not Running and
Halted.
System Services
Advanced Storage Configuration State
Indicates whether or not the system has been configured to
allow advanced storage configurations. This feature is
enabled/disabled using the
Currently supported advanced storage configurations
include Flexible Disk Configuration (see FDC Support Note
for more information) and
configuration (this
attribute must be enabled before you can configure ESS
disks in SCF).
Values: Enabled, Disabled, Unknown
Data Collection Services
Automatic Data Collection State
Indicates whether automatic data collection for failed
system resources is enabled or disabled. To change this
attribute state, use the Enable or Disable Automatic Data
Collection actions.
Diagnostic Data Collection Volume
Indicates the volume in which automatic or manual data
collection will take place. This volume is assigned by
using the Set Data Collection Volume action.
Days to Persist Collected Diagnostic Data
Indicates the number of days that collected hardware
failure data (collected either automatically or by the
action) is retained on the system
before being deleted.
Incident Report Configuration