HP Deskjet 9300 Printer series - Manual (Page 16)

3-3 ENWW
Minimum printing margins
Printing on various paper types and sizes
Printing on transparencies
To print on transparencies:
1 Insert HP Premium Inkjet Transparency Film, up to 30 sheets, rough-side down and the
adhesive strip pointing forward, along the right side of the main paper tray until it stops.
2 Slide the paper width and length adjusters in until they stop at the edges of the
transparencies.
Paper type/size Minimum printing margins
Letter, Legal, and Executive size paper Left: 6.4 mm (0.25 in.)
Right: 6.4 mm (0.25 in.)
Top: 3 mm (0.12 in.)
Bottom: 12.7 mm (0.50 in.)
A4-size paper Left: 3.4 mm (0.13 in.)
Right: 3.4 mm (0.13 in.)
Top: 3 mm (0.12 in.)
Bottom: 12.7 mm (0.5 in.)
A3, A3+, B4-size paper
Ledger/Tabloid (11 by 17 in.)
Statement
Super B (13 by 19 in.)
Banner (Tabloid)
Banner (A3)
Custom Left: 5.1 mm (0.20 in.)
Right: 5.1 mm (0.20 in.)
Top: 3 mm (0.12 in.)
Bottom: 12.7 mm (0.5 in.)
A5, B5-size paper
Cards (4 by 6 in., 5 by 8 in., A6)
Envelopes (#10, A2, Monarch, DL, C5, C6)
Photos (4 by 6 in.) with tear-off tab Left: 3.3 mm (0.13 in.)
Right: 3.3 mm (0.13 in.)
Top: 3 mm (0.12 in.)
Bottom: 12.7 mm (0.5 in.)
HP Greeting Card envelopes (4.38 by 6 in.) Left: 3 mm (0.12 in.)
Right: 3 mm (0.12 in.)
Top: 3 mm (0.12 in.)
Bottom: 12.7 mm (0.5 in.)
Banners - Letter size (8.5 by 11 in.) Left: 6.4 mm (0.25 in.)
Right: 6.4 mm (0.25 in.)
Top: 3 mm (0.12 in.)
Bottom: 12.7 mm (0.5 in.)
Banners - A4 size (8.27 by 11.7 in.) Left: 3.4 mm (0.13 in.)
Right: 3.4 mm (0.13 in.)
Top: 3 mm (0.12 in.)
Bottom: 12.7 mm (0.5 in.)
Use HP Premium Inkjet Transparency Film, which is specifically designed to work with your
HP printer. See
“HP supplies and accessories” for part numbers and ordering information.