HP StorageWorks 1510i Modular Smart Array - Manual (Page 125)

show preferred_path
Description Displays the current path (controller owner) for each LUN.
Syntax show preferred_path
Operands None
Example
CLI> show preferred_path
Controller 1 (this_controller) is the current optimal path for these units:
1,2,3,4
Controller 2 (other_controller) is the current optimal path for these units:
None
Implicit (automatic load-based) LUN ownership changes are currently ENABLED.
See also • set auto_path_change
• set preferred_path
newpage pi
1510i Modular Smart Array Command Line Interface user guide 125