HP ProLiant SL270s Gen8 SE Server - Manual (Page 34)

Hardware options installation 34
Hardware options installation
Introduction
If more than one option is being installed, read the installation instructions for all the hardware options and
identify similar steps to streamline the installation process.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION: To prevent damage to electrical components, properly ground the server before
beginning any installation procedure. Improper grounding can cause electrostatic discharge.
Connecting the SUV cable
CAUTION: Before disconnecting the SUV cable from the connector, always squeeze the release
buttons on the sides of the connector. Failure to do so can result in damage to the equipment.
Item Connector Description
1 SUV port SUV port on the server front panel
2 SUV connector For connecting to the SUV connector on the
server front panel
3 Video For connecting a video monitor
4 USB For connecting up to two USB devices
5 Serial For trained personnel to connect a null modem
serial cable and perform advanced diagnostic
procedures